Skip to main content

AbraSilver Drills 499 g/t Silver over 20 Metres, Including 1,261 g/t Silver over 7 Metres in New Southwest Zone at Diablillos

Toronto – November 22, 2022: AbraSilver Resource Corp. (TSX.V: ABRA; OTCQX: ABBRF) (“AbraSilver” or the “Company”) is pleased to announce new assay results from four diamond drill holes from the ongoing 15,000 metre Phase III program on the Company’s wholly-owned Diablillos property in Salta Province, Argentina (“Diablillos” or the “Project”).

Drilling is now concentrated in the recently discovered Southwest zone (JAC target) which is located several hundred metres southwest of the edge of currently defined Mineral Resources on the main Oculto deposit. Systematic grid drilling of the near-surface, high-grade silver mineralization is progressing and the Company anticipates announcing a maiden Mineral Resource estimate for this new zone in H1/2023.  Key takeaways from the latest drill results include:

  • Hole DDH 22-056 drilled in between the Oculto deposit and the JAC target intersected a broad zone of silver mineralization in oxides, with 57.5 metres grading 141 g/t Ag (and 0.27 g/t Au), starting from 110m down-hole, including 11.0 metres grading 549 g/t Ag and 0.72 g/t Au.
  • Hole DDH 22-057 drilled in the JAC target intersected multiple zones with high-grade silver mineralization in oxides, with 20.0 metres grading 499 g/t Ag, starting from 144m down-hole, including 7.0 metres grading 1,261 g/t Ag. 
  • Hole DDH 22-058 was drilled ~800m southwest of the Oculto deposit boundary towards the expected SW limit of the JAC target.  The hole intersected 14.5 metres grading 176 g/t Ag in the transition zone beneath the oxide mineralization.  

The latest assay result highlights are summarized in Table 1 below.

Table 1 – Diablillos Drill Results in Southwest Zone
(Intercepts greater than 2,000 gram-metres AgEq shown in bold text):

Drill Hole

 

From
(m)

To
(m)

Type

Interval
(m)

Ag
g/t

Au
g/t

AgEq1
g/t

DDH-22-055

 

156.0

175.0

Oxides

19.0

48.5

0.02

50.1

DDH-22-055

Includes

165.0

167.0

Oxides

2.0

200.1

0.15

212.4

DDH-22-056

 

110.0

167.5

Oxides

57.5

141.4

0.27

163.5

DDH-22-056

Includes

153.0

164.0

Oxides

11.0

549.2

0.72

608.2

DDH-22-057

 

67.0

93.0

Oxides

26.0

140.9

-

140.9

DDH-22-057

Includes

68.0

71.0

Oxides

3.0

504.9

-

504.9

DDH-22-057

 

103.0

138.0

Oxides

35.0

89.5

0.21

106.7

DDH-22-057

 

144.0

164.0

Oxides

20.0

498.6

0.10

506.8

DDH-22-057

Includes

150.0

157.0

Oxides

7.0

1,260.9

0.19

1,276.5

DDH-22-058

 

84.0

87.0

Oxides

3.0

72.1

-

72.1

DDH-22-058

 

130.0

133.0

Oxides

3.0

87.5

-

87.5

DDH-22-058

 

138.0

152.5

Transition

14.5

176.2

-

176.2

DDH-22-058

 

155.5

163.0

Transition

7.5

39.4

-

39.4

Note: All results in this news release are rounded. Assays are uncut and undiluted. Widths are drilled widths, not true widths. True widths are estimated to be approximately 80% of the interval widths.
1AgEq based on 81.9(Ag):1(Au) calculated using long-term prices of US$25.00/oz Ag and US$1,750/oz Au, and 73.5% process recovery for Ag, and 86.0% process recovery for Au as demonstrated in the Company’s Preliminary Economic Assessment in respect of Diablillos dated January 13, 2022, using formula:  AgEq g/t = Ag g/t + Au g/t x (Gold Price/Silver Price) x (Gold Recovery/Silver Recovery).

John Miniotis, President and CEO, commented, “While we have lots of drilling yet to do, our new JAC target is rapidly growing into the type of high-grade discovery that can have game-changing potential for our Company.  We remain very encouraged by all the results received to date from this new mineralized zone, and it is our expectation that the JAC target will contribute greatly towards the Company’s goal of increasing the overall size and attractiveness of the Diablillos project.” 

Dave O’Connor, Chief Geologist, commented, “Once again, the latest drill results from our new JAC target continue to return extensive high-grade, near-surface silver mineralization.  Hole DDH 22-058, returned 14.5 metres at 176 g/t Ag and is located approximately 800 metres beyond the current Oculto Mineral Resource, demonstrating the large extent potential of this target. The JAC discovery was made by drilling a magnetic anomaly and we plan to complete additional magnetic studies in order to potentially identify additional exploration targets across the Diablillos property over the next few months.”

Figure 1 – Diablillos Plan View of Drill Results & Exploration Targets

image-20221122132234-1

Discussion of Drill Hole Results

Hole DDH 22-056, located in between the JAC target and the conceptual Oculto open pit boundary, intersected a broad zone of silver mineralization including 11 metres at 549 g/t Ag and 0.72 g/t Au. The gold content in this intercept suggests that the mineralization may be a continuation of the Oculto system, whereas mineralization encountered to date in holes further southwest (within the JAC target) has been predominantly silver with minimal gold.

Hole DDH 22-057 was designed to test the centre of the JAC target and intersected 20 metres at 498 g/t Ag. Together with adjacent holes, the data indicates a sub-horizontal mineralized zone in the JAC target measuring over 100 metres wide. Ongoing drilling will continue to determine the dimensions of the JAC mineralized system. 

Hole DDH 22-058, located approximately 700 metres southwest of hole DDH 22-056, intercepted 14.5 metres at 176 g/t Ag, highlighting the considerable length potential of the JAC mineralized zone.  Additional drilling will test whether mineralization continues further southwest, beyond hole DDH 22-058.

To date, assay results have been announced for a total of nine holes in the JAC target, with all holes returning silver mineralization in oxides at reasonably shallow depths. The JAC target remains open in all directions, with a total of 22 holes having now been drilled with assays currently pending for 13 holes.  Both drill rigs are rapidly advancing our understanding of this new exploration target in preparation for an updated Mineral Resource estimate in H1/2023, which will be followed by a Pre-Feasibility Study on the entire project. 

Figure 2 below displays a long-section of the latest drill results from the Southwest zone.

Figure 2 – Long Section Through Newly Announced Drill Holes in the JAC Target

image-20221122132234-2

.     

The mineralization in the Southwest zone is related to a large, linear magnetic anomaly which appears to be open for approximately 800 metres along strike and has never been drill tested.  Figure 3 below, shows the magnetic anomaly of the JAC target.

Figure 3 –Magnetic Anomaly in JAC Target

image-20221122132234-3

Collar Data

Hole Number

UTM Coordinates

Elevation

Azimuth

Dip

Depth (m)

DDH 22-055

E719776

N7198830

4,176

0

-60

212

DDH 22-056

E719891

N7198991

4,186

0

-60

200

DDH 22-057

E719650

N7198777

4,165

0

-60

200

DDH 22-058

E719413

N7198584

4,145

0

-60

191

About Diablillos

The 80 km2 Diablillos property is located in the Argentine Puna region - the southern extension of the Altiplano of southern Peru, Bolivia, and northern Chile - and was acquired from SSR Mining Inc. by the Company in 2016.  There are several known mineral zones on the Diablillos property, with the Oculto zone being the most advanced with over 120,000 metres drilled to date.  Oculto is a high-sulphidation epithermal silver-gold deposit derived from remnant hot springs activity following Tertiarty-age local magmatic and volcanic activity. Comparatively nearby examples of high sulphidation epithermal deposits include: Yanacocha (Peru); El Indio (Chile); Lagunas Nortes/Alto Chicama (Peru) Veladero (Argentina); and Filo del Sol (Argentina).

The most recent Mineral Resource estimate for the Oculto Deposit is shown in Table 2:

Table 2 - Oculto Mineral Resource Estimate – As of October 31, 2022

Category

Tonnage
(000 t)

Ag
(g/t)

Au
(g/t)

Contained Ag
(000 oz Ag)

Contained Au
(000 oz Au)

Measured

19,336

98

0.88

60,634

544

Indicated

31,978

47

0.73

48,737

752

Measured & Indicated

51,314

66

0.79

109,370

1,297

Inferred

2,216

30

0.51

2,114

37

Notes: Effective October 31, 2022. Mineral Resources are not Mineral Reserves and have not demonstrated economic viability. The Mineral Resource estimate is N.I. 43-101 compliant and was prepared by Luis Rodrigo Peralta, B.Sc., FAusIMM CP(Geo), Independent Consultant. A full Technical Report in respect of the Mineral Resource will be prepared in accordance with NI 43-101 and will be filed on SEDAR within 45 days of the news release dated November 03, 2023. The mineralisation estimated in the Mineral Resource is sub-horizontal with sub-vertical feeders and has a reasonable prospect for eventual economic extraction by open pit mining methods.

QA/QC and Core Sampling Protocols

AbraSilver applies industry standard exploration methodologies and techniques, and all drill core samples are collected under the supervision of the Company’s geologists in accordance with industry practices. Drill core is transported from the drill platform to the logging facility where drill data is compared and verified with the core in the trays. Thereafter, it is logged, photographed, and split by diamond saw prior to being sampled. Samples are then bagged, and quality control materials are inserted at regular intervals; these include blanks and certified reference materials as well as duplicate core samples which are collected in order to measure sample representivity. Groups of samples are then placed in large bags which are sealed with numbered tags in order to maintain a chain-of-custody during the transport of the samples from the project site to the laboratory.

All samples are received by the SGS offices in Salta who then dispatch the samples to the SGS preparation facility in San Juan. From there, the prepared samples are sent to the SGS laboratory in Lima, Peru where they are analyzed. All samples are analyzed using a multi-element technique consisting of a four acid digestion followed by ICP/AES detection, and gold is analyzed by 50g Fire Assay with an AAS finish. Silver results greater than 100g/t are reanalyzed using four acid digestion with an ore grade AAS finish.

Qualified Persons

David O’Connor P.Geo., Chief Geologist for AbraSilver, is the Qualified Person as defined by National Instrument 43-101 Standards of Disclosure for Mineral Projects, and he has reviewed and approved the scientific and technical information in this news release.

About AbraSilver

AbraSilver is an advanced-stage exploration company focused on rapidly advancing its 100%-owned Diablillos silver-gold project in the mining-friendly Salta province of Argentina.  The current Measured and Indicated Mineral Resource estimate for Diablillos consists of 51.3 Mt grading 66g/t Ag and 0.79g/t Au, containing approximately 109Moz silver and 1.3Moz gold, with significant further upside potential based on recent exploration drilling. The Company is led by an experienced management team and has long-term supportive shareholders including Mr. Eric Sprott.  In addition, AbraSilver owns a portfolio of earlier-stage copper-gold projects including the La Coipita copper-gold project in the San Juan province of Argentina. AbraSilver is listed on the TSX-V under the symbol “ABRA” and in the U.S. under the symbol “ABBRF”.

For further information please visit the AbraSilver Resource website at www.abrasilver.com, our LinkedIn page at AbraSilver Resource Corp., and follow us on Twitter at www.twitter.com/abrasilver

Alternatively please contact:

John Miniotis, President and CEO
info@abrasilver.com
Tel: +1 416-306-8334

Cautionary Statements

This news release includes certain "forward-looking statements" under applicable Canadian securities legislation. Forward-looking statements are necessarily based upon a number of estimates and assumptions that, while considered reasonable, are subject to known and unknown risks, uncertainties, and other factors which may cause the actual results and future events to differ materially from those expressed or implied by such forward-looking statements. All statements that address future plans, activities, events or developments that the Company believes, expects or anticipates will or may occur are forward-looking information. There can be no assurance that such statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements. When considering this forward-looking information, readers should keep in mind the risk factors and other cautionary statements in the Company’s disclosure documents filed with the applicable Canadian securities regulatory authorities on SEDAR at www.sedar.com.  The risk factors and other factors noted in the disclosure documents could cause actual events or results to differ materially from those described in any forward-looking information. The Company disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release

 

About the author

Average: 5 (1 vote)

Newsletter Signup

Join the Free Weekly Silver Review!
SilverSeek.com week in review delivered direct to your inbox!